| |
|
f
|
 |
|
Burgener
Nebulizers - Specs
|
NO
PLUGGING: BURGENER NEBULIZERS USE THE PATENTED ENHANCED PARALLEL PATH METHOD. |
|
|
The
Enhanced Parallel Path Method:
US Patents # 5,411,208; 6,634,572
Canadian Patents # 2,112,093; 2,384,201
|
|
| |
|
Shopping
Cart
Product
Overview
Sherba
History
ICP
Glassware
Nebulizers
Graphites
DCP
Parts
Newsletter
|
|
| With the T2002 Nebulizers, we use "press fit" capillary
tubing for the sample delivery. If a sample capillary
tube plugs, just remove it and replace with a new one.
Adjustment is not critical as long as the capillary is 5-10
mm from the tip. The Mira Mist & Ari Mist have an
interior capillary that is not changeable. The Mira Mist is difficult to plug with undissolved solids (Never yet been a reported case) but the capillaries in the Ari Mist can be plugged the same as a glass concentric, so solutions must be filtered for the Ari Mist. |
 |
|
 |
|
|
| NO
SALTING, NO MAINTENANCE: BURGENER NEBULIZERS USE 100% PTSE
TEFLON. |
|
| SALTS do not adhere to
Teflon, so there is NO DRIFT DUE TO SALTING, NO ACID
REQUIRED. Teflon is not attacked by acids or organic
solvents, so it does not dissolve as you use it.
Atomizes any liquid, any salt level, and slurries. Less
than 2% RSD for most elements for long periods.
Install it in your chamber, optimize it and then just run
it for the rest of its lifetime. Typical Lifetimes are 6
months to 3 years. Total Satisfaction Guarantee is for 3
months. NOTE: A few instances of salting have been
reported with very high levels of NaOH, NaCI.
|
| NO
PART TO REPLACE OR ADJUST: MACHINED FROM A SINGLE PIECE OF
PTFE |
|
| No alignment or
adjustments, no parts to assemble, No Sapphire Bead for the
gas origice - nothing to salt up. Resists breakage, no
spare parts required. |
|
| SAME
SIZE AS CONCENTRIC NEBULIZERS |
|
| Fits standard chambers,
including cyclonic chambers, easy to install and operate. |
|
| Please
call us and we will assist you in selecting the correct
Nebulizer for your ICP/ICP-MS |
|
 |
FOR
PRICE INQUIRIES, MORE INFORMATION
OR
TO PLACE ORDERS:
Email:
sherba@sherba.com
Telephone:
1-800-228-5085 * 1-727-849-9456
Fax: 1-727-844-3613
Address:
Sherba Analytical Lab
Products, Inc.
P.O. Box 880
New Port Richey, Florida 34656-0880, U.S.A.
|
|
|
