| |
Shopping
Cart
Product
Overview
Sherba
History
ICP
Glassware
Nebulizers
Graphites
DCP
Parts
Newsletter
|
The Leader In Burgener
Nebulizers
|
Sherba
Analytical supplies the best Teflon Nebulizers -
manufactured by Burgener Research, Inc.
|
|
|
|
|
Burgener
Mira Mist |
Please
call us and we will assist you in selecting the correct
Nebulizer for your ICP/ICP-MS
Telephone:
1-800-228-5085 * 1-727-849-9456
Fax: 1-727-844-3613
|
| |
Burgener
Nebulizers for ICP
|
Operating Pressure
for
0.7 l/min
|
Sample Flow Rates
|
|
Teflon Mira Mist . . . .$ 975
The best ICP nebulizer available. It is an Enhanced Parallel Path Teflon Nebulizer. Runs 0.2 ml/min to 2.5 ml/min. Excellent mist, and can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Operates on standard pressures of 35 - 45 psi. The Teflon Mira Mist can be used for any liquid.
|
35-40 psi
|
0.2-2.5 ml/min
|
 |
|
Peek Mira Mist . . . .$ 875
Same as the Teflon Mira Mist, but easier to make than the Teflon Mira Mist, so you save a little. Works for most samples, but not concentrated acids, and not some organic solvents. Still has Teflon capillaries for the samples and for the gas. Standard pressure (45 psi), low sample flow, enhanced parallel path design. Can operate on 0.2 ml/min to 2.5 ml/min. Excellent mist, and can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers.
|
35-40 psi
|
0.2-2.5 ml/min
|
 |
|
T2100 . . . .$ 875
A blend of the best features of the Teflon Mira Mist and the T2002. Un-pluggable Huge sample capillary ID of 750 microns (1/32 inch)! Slightly less sensitive and slightly poorer stability than the Mira Mist, but better sensitivity and stability than the T2002. Works for all liquids. Handles high undissolved particle levels and slurries. Standard pressure (45 psi), low sample flow, enhanced parallel path design. Can operate on 0.5 ml/min to 2.5 ml/min. Fits regular chambers as a direct replacement for glass concentric nebulizers.
|
35-40 psi
|
0.5-2.5 ml/min
|
 |
|
Testimonial on the T 2100:
Tom:
I recently ordered the Burgener T2100 workhorse nebulizer for my Leeman Profile ICP. I have tried many different brands of nebulizers before and had not much luck with them. Installing the Burgener was a breeze setting up and basically used the same setting I had with the existing Hybrid nebulizer I was using. I must say I was hesitant about changing the nebulizer, but I was having difficulties with wash out times and stability with the one I was using.
When peaking Mn with the Hybrid nebulizer, I was only getting about 862,000 counts for 10 ppm Mn. Now with the T2100 I am getting close to 3,000,000 counts for 10ppm Mn. With the increased sensitivity, my detection limit has also improved dramatically. Some elements like Ag, Na, W were taking the instrument as long as 30 minutes to wash out. With this T2100, wash out time was only 15-30 seconds max. That alone is worth the change and has helped get samples out faster to clients.
I would recommend the Burgener to anybody looking for better performance from their instrumentation.
Philip Williams, Lab Manager, ACS LABS, www.acslabs.com, 281-579-8822
|
|
|
Burgener
Nebulizers for ICP
|
Operating Pressure
for
0.7 l/min
|
Sample Flow Rates
|
|
T2002 . . . .$ 925
Our original Nebulizer - virtually unpluggable. Works well on most ICPs. Fits most chambers. Best results are with Cyclonic Chambers. Not as good as the new T2100.
|
35-40 psi
|
0.5-3 ml/min
|
 |
|
|
Burgener
Nebulizers for ICP/MS
|
Operating Pressure
for
1.0 l/min
|
Sample Flow Rates
|
|
|
Ari Mist . . . .$ 975
Very low sample flow, enhanced parallel path design. Standard pressure (40 - 50 psi). Black PEEK body, Teflon sample and gas capillaries. Can operate on 0.050 ml/min to 1.0 ml/min. Good for ICP and ICP/MS. Only for samples that are particulate free. Fits regular chambers as a direct replacement for glass concentric nebulizers.
|
35-40 psi
|
0.05-1.0 ml/min
|
 |
|
Ari Mist HP. . . .$ 1100
Ultra low sample flow, enhanced parallel path design. Higher Pressure (80 psi). Black PEEK body, Teflon sample and gas capillaries. Can operate on 0.005 ml/min to 1.0 ml/min. Good for LC/ICP/MS. Only for samples that are particulate free. Fits regular chambers as a direct replacement for glass concentric nebulizers. When run at 10 to 15 ul/min it provides similar results to direct injection nebulizers, without the difficulties of direct injection.
|
80-90 psi
|
0.005-1.0 ml/min
|
|
|
Mira Mist CE. . . .$ 3950
Designed for ICP/MS - CE interface. Medium pressure (80-90 psi), Very low sample flow (10 ul/min or less), enhanced parallel path design. Can operate on 0.01 ml/min to 2.5 ml/min. With Alcohol solutions can operate down to .001 ml/min. Excellent mist, can handle high level of particulates in sample. Fits regular chambers as a direct replacement for glass concentric nebulizers. Designed for CE / ICP / MS analysis. Allows CE capillary to extend to tip of nebulizer for zero suction, zero back pressure CE interfacing with ICP / MS. Works best with mini chamber.
|
80-90 psi
|
0.005-2.5 ml/min
|
 |
|
 |
FOR
PRICE INQUIRIES, MORE INFORMATION
OR
TO PLACE ORDERS:
Email:
sherba@sherba.com
Telephone:
1-800-228-5085 * 1-727-849-9456
Fax: 1-727-844-3613
Address:
Sherba Analytical Lab
Products, Inc.
P.O. Box 880
New Port Richey, Florida 34656-0880, U.S.A.
|
|
|
| |
|
